• 思缘论坛首页
  • 论坛搜索
  • 设计软件,PS下载
  • 平面设计
  • 精品套图素材
  • 高端国外素材
  • 缘分币充值
 31 1234
发新话题
打印

[PS合成] Photoshop创建能源饮料广告设计(T)

Photoshop创建能源饮料广告设计(T)

Create an Energy Drink Ad Design
Photoshop创建能源饮料广告设计



Author: Alex Beltechi
翻译:Sunnie




Before we get started, let's take a look at the image we'll be creating.
在开始之前,让我们看一下效果图



[ 本帖最后由 猫瞳911 于 2009-5-21 16:49 编辑 ]

本帖最近评分记录
  • 琦琦儿 缘分币 +100 版主推荐教程奖励 2009-6-1 17:19
  • 琦琦儿 威望 +10 版主推荐教程奖励 2009-6-1 17:19
  • 猫瞳911 缘分币 +26 感謝翻譯教程。加分鼓勵 2009-5-21 16:52
  • 猫瞳911 威望 +3 感謝翻譯教程。加分鼓勵 2009-5-21 16:52

TOP

Step 1
Begin by opening a new Photoshop document at 1600px by 1280px. Fill the background layer with this color: (#b1c900).
第一步
创建文件:1600X1280像素,填充#b1c900颜色






Step 2
Bring up your Custom Shapes Menu and select the Ray shape, as shown below. You can find it under the Symbols Folder. Then draw the first one right in the middle that is large enough to spread outside the canvas. Use this color: (#bddc01).
As soon as you create the first one, duplicate it. Then rotate the copy so that it leaves just a thin line of the background. Then change it to this color: (#d3eb45). You should align them so that they match the image below.
第二步
打开自定义形状对话框,选择如下图的放射图案(Photoshop自带形状),前景色#bddc01,先画出一个以背景图的中心为中心,足以覆盖整个画布的图案。
复制图案,并将复制图案稍稍旋转一下,改变复制图案的颜色为#d3eb45









Step 3
At this point, begin painting with a Regular Circle Brush at different sizes. Set your Brush Opacity to 60%, change the color to (#7a263e), and click individually while changing the size for each spot. By manually creating each spot, you have more control over your layout. Once you've created the first set, add a few spots on a separate layer with this new color: (#93133d).
第三步
这时,用一般的圆形笔刷画出不同大小的圆形:笔刷透明度为60%,颜色#7a263e,在不同的地方涂画,通过手动画圆,创建图片的布局。第一套画好后,新建一个层,选用颜色#93133d,添加新的圆形图案。






Step 4
Next, make a new layer and add smaller spots with this color (#cdde67). Again, on a separate layer, paint even smaller spots with a slightly more saturated color: (#d9f14a).
第四步
之后,新建一个层,选用颜色#cdde67画圆圈,再新建一个层,用颜色#d9f14a画圆圈







Step 5
Now it's time to add some contrast by using a saturated version of the color that you used for the very first spots: (#93133d)
第五步
现在用前面使用过的颜色#93133d,添加一些对比色调







Step 6
To finish off the effect, create some small spots that follow the original layout, and others that fill the unused space of the canvas. Make sure to fade them out gradually as they approach the edge of the canvas. As a final touch, add a new color that will later be transformed into a vivid pink: (#7b2dc1).
第六步
为了达到更好的效果,在所创建圆点周围的空处,制作一些小圆点。
最后,添加一个新的颜色#7b2dc1,之后在我们的制作里将变成生动的粉红色



TOP

Step 7
Select all the shapes, spots, and background layers and press Ctrl+Shift+E to merge them together. After they are all merged, duplicate the layer. Name this new layer radial blur. Then go to Filter > Blur > Radial Blur and insert the values shown below.
第七步
选择所有图层,按Ctrl+Shift+E,合并图层。复制合并图层,命名为径向模糊层,滤镜-模糊-径向模糊,参数设置如下图所示:








Step 8
Select the radial blur layer and change its blending mode to Difference. Merge both layers together. Then go to Image > Adjustments > Hue/Saturation, or simply press Ctrl+U. Then change the Hue to 73.
第八步
选择径向模糊图层,图层模式为差值。再次合并图层,然后选择图像-调整-色相/饱和度或按Ctrl+U,调整色相为73








Step 9
Enter Quickmask Mode (Q), and use the Bucket Tool with the color set on black to fill the whole canvas. Next select the Eraser Tool, and add some scattering to it's preset.
Now drag across the canvas while focusing on the center. As soon as you're done with that, exit Quickmask Mode (Q) again, and invert the selection by pressing Ctrl+Shift+I. Then right-click on the canvas while the Marquee Tool is selected. Then chose the Layer Via Copy option. As soon as you have the selection in a new layer, go to Filter > Blur > Gaussian Blur, and blur it by 4 pixels.
第九步
复制图层,按Q,添加快速蒙板,用油漆桶填充黑色,选择柔角橡皮擦工具,笔刷设置散布(参数设置如下图所示)
现在以画布中心为焦点,用橡皮擦涂抹,做好后,退出快速蒙板。按Ctrl+Shift+I反选,用魔棒选择所选部分,点鼠标右键-通过拷贝的图层,新建拷贝图层。
在拷贝图层上:滤镜-模糊-高斯模糊,半径为4.0像素






TOP

Step 10
At this point it's time to add the can. Then cut it out with the Pen Tool. Once you have that done, position it in the center, and rotate it at a 45 degree angle. Then change the hue by 180. The use the Burn Tool to darken the lower left half of the can.
第十步
现在添加饮料罐。打开饮料罐图片,用钢笔工具截出饮料罐,裁好后拖入图中,旋转45度,调整色相为180,用加深工具将饮料罐左下部变暗。








Step 11
Now you need to hide a part of the can in order to fade it into the rest of the photo. So enter Quickmask Mode again. Then fill the entire canvas with black. Erase the part that you want left out with a soft brush. After that, exit Quickmask Mode.
Then go to Layer > Layer Mask > Hide Selection. You may also want to sharpen it at this point. To do so, go to Filter > Sharpen > Sharpen.
第十一步
现在需要隐藏饮料罐的一部分:点击快速蒙板,填充黑色,用柔角橡皮擦工具擦去要留下的部分,退出快速蒙板。
选择图层-图层蒙板-隐藏选区。锐化这部分:滤镜-锐化-锐化





Step 12
Now if you'll look closely at the photo, you'll notice that it's simply too smooth. Rather than adding noise or grunge.  So first off, fill the canvas area with white.
Then go to Filter > Pixelate > Mezzotint. Select Medium Dots and then apply the filter. Then set the layer's Blending Mode to Color Burn.
第十二步
仔细观察图片,你会发现图片太过柔和,所以需要添加一些噪点或污迹。
新建一个层,填充白色,选择滤镜-像素化-铜板雕刻,选择中等点,
滤镜-模糊-径向模糊,参数设置如下图所示
图层模式为颜色加深










Step 13
In the final step is to add the title on the left side of the canvas. After typing it in, double-click on the layer, and use the layer style described in the photo below.
第十三步
最后给图片添加标题。打好字,双击字体图层,选用下图所示的图层样式








Final Result
最后效果


TOP

素材图片

附件

饮料.jpg (67.3 KB)

2009-5-21 12:44

饮料.jpg


TOP

练习作业。效果很差啲说

附件

作业.jpg (55.75 KB)

2009-5-21 12:45

作业.jpg


本帖最近评分记录
  • 猫瞳911 缘分币 +3 作業分。 2009-5-21 16:49

TOP

哇塞,,不得了,看来又要拿一个推荐教程奖了

TOP

個人不大喜歡這種顏色。臟了。色調很暗。色彩搭配不好呢
飲料是清爽的。【配這個不會影響廣告效果?
要是我看到會毫不猶豫選擇不買這個產品

個人意見。
辛苦LZ翻譯咯~
制作方法很值得參考學習

Stay away from me,

TOP

很不错的教程,但是有些东西不太理解

就是3-6步。难道非要用这个复杂的过程来实现第七步的径向吗?所以不明白为什么要这样

让我去想的话。我根本就想不到要这么做,更想不到按照3-6步做完后会出现第七步的效果。

既然不明白以后会出现什么样子的图形,又怎么能继续以后的操作呢?

而且我也比较认同楼上的看法,这个颜色确实感觉有点用的过了,显得有点脏。不明白是故意这样还是...?

小得才疏学浅,望高人指点~!

[ 本帖最后由 几何的悲哀 于 2009-5-22 17:06 编辑 ]

越来越笨~啥都不会

TOP

引用:
原帖由 几何的悲哀 于 2009-5-22 17:04 发表
很不错的教程,但是有些东西不太理解

就是3-6步。难道非要用这个复杂的过程来实现第七步的径向吗?所以不明白为什么要这样

让我去想的话。我根本就想不到要这么做,更想不到按照3-6步做完后会出现第七步的效果 ...
最好是把你的问题 发到 PS问题交流区 可以让大家一起帮你想办法

不过根据我对PS的了解,即使是一样的效果 来实现效果的方法不一定是一样的 !

教程中需要的素材请访问:优秀的PS素材和图片素材

TOP

 31 1234
发新话题

关于本站 广告服务 联系我们 版权隐私 合作站点 网站地图 免责申明 管理团队

Powered by Discuz Copyright © 2005-2019 www.MissYuan.com All rights reserved.站长QQ8713688 邮箱8713688@qq.com